Відео

Mine has all those problems the steering, stabilitrack, abs and exhaust. Your resonator might have a hole in it. Mine does.

Looks awesome

My 2017 is doing this now.

Good job

My air flow sensor is 57 AutoZone I just took my part out it was dirty I have the new one

Good video I am thinking about doing that. Or a set of 2 into 1 LAF pipes.

Live to ride, Ride to live.

Replace the 1.2 orifice inside of the cannon with a 1.1 and get twice the foam

looks awesome. how do you remove the steering wheel pieces?

11:48 that laugh + his house number lmao good video i trying to do this on my 03 cateye

Mine came with the 3m small tape but no magnets? What do I do?

I have a 2017 buick enclave with the same motor, had the same lights an some codes, changed Sensor on fuel rail, changed both O2 sensors, plugs, cleaned th same areas you did, but with no oil, everything has been fixed or is corrected except i have a slight miss that brings up the check engine light, i am going to change the coil packs next to see 🙈 f that removes the he slight miss, i think you are on the right track will h the converters, I to live on a strict budget but what with all the high pprices for parts now days i have learned to ask others an view goggle which leads me to UTube in which there is alot of info.

I live in Nevada and bought a 03 Silverado that was from Pennsylvania. The bottom was full of rust and so I decided to try and replace most of the front suspension. While this is a super easy project once you have rust it’s not at all easy. Instead of spending hours or days trying to smack the two 21mm or 22mm bolts out of the control arms just get an occulting tool with carbide blades and cut the bolts from inside the control arm mount. It takes like 10 minutes and a few blades but it’s better than spending 5 hours hammering on it and using can after can of pb blaster for 5 hours

Thank you. My wife’s car needs this done and you saved me $160 in labor fees!

What is that muffler? Sounds good 👌

This came out so good, bro. That blue paint on the black is sick.

Thanks, Partner. I'm here brainstorming my installation. Goodness😂

Hey jetro ee dints wanna hear ur life story, just tell us about the thingamajig

Thanks i couldnt get my ball joint out (no pickle fork) and you were the only one that showed beatin on the spindle which worked! Thanks again!

Got mine the other day,and thanks to your video i was able to install them the right way, but i find it better if you purchase a bigger magnet,it also works better with a flat door panel,nice video very professional

Foam is too runny.

Did you ever figure out why the abs/stabilitrak lights come on? Ever get it fixed??

Does each extension run to each light? Meaning if you had 4 total lights in the rear, you’d need 4 extension wires to all run up to the engine bay?

Well my problem is when i got mine 2000 silverado only one head light was working looked down the wires are snip in half so rewired them the headlight that wasnt working was working then it turned off could bad module cause one headlighg not to work?

I agree with you on the grill ! The OEM GT grill from Ford by far looks the best !! Be prepared for bad night vision with the nightshade tint on your lights !! My lights are the same way on my 06 GT.

How much for the truck?

U made this process very easy thanks!

I love how you showed how to make it vertical!! 😁 dislike earned!!

even with the breaker bar it looked hella hard to remove those bolts

1993 Silverado head lights dont turn on y 2:43 2:44 2:44

Nice car man

I wanna do this to my Acura rl calipers and I have both primered. Do they need to be primered before putting the the base coat?

What size orifice does it have

Thanks for the welcome. Happy to be here

Do u have to use the actual stick to attach to the soap sprayer or something else

do you happen to know what size the 'E' style inverted torx bit is on that upper cover? (despite you not having to remove yours because of that broken cover)

How the fuck did I know this was Kansas just by seeing the ground lmfao

Messaged you on Instagram about this video if you could take a look!

so where did u tap in the led strip of the top did you just run it to the same bottom wires for the other led strip?

Thank you

A year later....review?

I had the same problem with my 08 GMC acadia. Threw the parts cannon at it and nothing. Then... I disconnected the brake fluid level sensor and my dashboard Christmas tree went away. Bad sensor:-)

Okay, you just showed me just to take it to a mechanic. Thank you

What’s the exact name of these I don’t want to get anything else but these ?

What I do when my high beems don’t work ? And on the dash the high beem light stays on with the lows and highs. ( my low beems do work )

Are they still on and last well?

Wtf was that camera work at the 7 min mark

That reservoir on the side of the air duct is for intake sound tuning, a resonator of sorts. Nothing on that duct is a drain or oil catch.

I just replace a marker light just as you did. Later that day I noticed the headlight was out. Next day drove to store and installed a head light. Then notice I had no headlights. Drove home and while still sitting in my vehicle and watching your video my headlights suddenly came on... Thank you.

You've got the grain going in the wrong direction on the top of the airbag. It should have been turned around to match the rest of the panels. A easy mistake placing that piece first, before seeing the rest of them.